Zum Hauptinhalt springen
Alle Artikel

Who Can See What in a Battery Passport? The Four Access Levels Explained

A battery passport is not one public page. The EU Battery Regulation splits its 71 data points into four access levels: public, persons with a legitimate interest, authorities only, and state-of-health data. Here is what sits in each level, who can open it, what is still undecided, and what that means for the data you hand over.

Ileana Sofronie 7 min read
Battery Passport
EU Battery Regulation
Access Rights
Data Protection
Annex XIII

The first worry most battery companies raise about the passport is not the deadline. It is this: "Will my competitors be able to read my cell chemistry, my test reports and my suppliers off a QR code?"

No. The battery passport is one record with several doors. Regulation (EU) 2023/1542 assigns every piece of passport information to an access level, and most of the commercially sensitive data sits behind doors that only specific groups can open. This article walks through the four levels, what lands in each, and what is still being decided.

Article 77(2) of the Battery Regulation says the passport information must be accessible according to Annex XIII. Annex XIII groups the information into four parts, and each part has its own audience: the public, persons with a legitimate interest, notified bodies and market surveillance authorities with the Commission, and, for state-of-health data, persons with a legitimate interest again.

The Commission's guidance "Digital Batteries Passport – data points by category" (v3.2, 19 October 2026) turns that into 71 numbered data points, each tagged with its access level and with whether it is mandatory, conditional or optional for EV, LMT and industrial batteries.

Level 1: Public

Anyone who scans the QR code sees this part. It is the battery's public identity card:

  • Identification: the unique battery identifier, the party responsible for the passport, manufacturer name and address, battery category and model, manufacturing plant and date, mass and rated capacity.
  • Composition at headline level: chemistry, hazardous substances, fire suppressant, critical raw materials, share of renewable content.
  • Performance and durability at placing on the market: voltages, original power capability and limits, expected cycle life, round-trip efficiency, internal resistance, temperature range, and the reference test those figures come from.
  • Labelling and conformity: the separate-collection symbol, the cadmium and lead marking where it applies, a link to the EU declaration of conformity and the waste-prevention information.

Several public data points are marked "not to be filled" for February 2027 in the v3.2 guidance: the carbon footprint, supply-chain due diligence and recycled-content shares. They exist in the data model, but nobody has to publish them on day one.

What this means for you: nothing in Level 1 is a trade secret in practice. Most of it is already on your datasheet or your label. The work is collecting it in one consistent, machine-readable form.

Level 2: Persons with a legitimate interest and the Commission

This is where the detail that repairers and recyclers need lives:

  • Detailed composition: cathode and anode active materials, electrolyte.
  • Part numbers and spare parts: where to get components, as one link.
  • Dismantling information: how to take the battery apart safely.
  • Safety measures.

The purposes in view are repair, preparing for re-use, repurposing, remanufacturing and recycling. A recycler planning a process line or a workshop replacing a module can open this level; a competitor scanning a shelf cannot.

Level 3: Notified bodies, market surveillance authorities and the Commission

One data point lives here: the results of the test reports proving compliance with the Regulation's performance and durability requirements. Your full test documentation stays with the authorities who check conformity. It is the most sensitive document in the passport, and it is the most closed.

Level 4: State of health and dynamic data, persons with a legitimate interest

This level is different because it changes over the battery's life. It holds the dynamic data: remaining capacity, capacity fade, power fade, internal resistance increase, round-trip efficiency fade, state of certified energy for EV batteries, self-discharge, full cycles, negative events, operating conditions, state of charge. Three points worth knowing:

  • Expected lifetime (#60) sits here, not in the public part.
  • Battery status (#67) sits here too: original, reused, repurposed, remanufactured or waste.
  • Which of these points are mandatory differs by category. Remaining capacity and self-discharge, for instance, are mandatory for LMT batteries and conditional for industrial ones.

The people who need this level are buyers of used batteries, second-life operators, fleet managers and recyclers: anyone who has to judge what a battery is still worth.

What is still undecided

The four levels are fixed in the Regulation. How a person proves a legitimate interest, and how access is granted technically, is not yet. That is the job of the implementing act under Article 77(9), which was in draft consultation in October 2026 and is not adopted.

Until it is, a provider has to make a defensible choice. Ours: restricted levels are opened with access keys issued to a named party for a stated purpose, every restricted read is logged, and the passport itself is never duplicated into "public" and "private" versions. When the implementing act lands, the rules for issuing keys change; the passport and its QR code do not.

Common misunderstandings

"Everything in the passport is public." No. Of the 71 data points, the composition detail, dismantling information, test reports and all state-of-health data are restricted.

"We can keep a field out of the passport if it is sensitive." No. A mandatory data point has to be in the passport; the access level decides who sees it, not whether it exists.

"Restricted data can live in a PDF somewhere else." The passport must be machine-readable and structured. A link to a PDF can be the content of some data points (the declaration of conformity is one) but not a substitute for the passport itself. See Death of the Static PDF.

"Authorities will email us when they need the test reports." They read Level 3 directly from the passport. The reports have to be there from the day the battery is placed on the market.

What to do now

  1. Sort your data by level before you collect it. The Level 1 data usually comes from your datasheet; Level 2 from engineering and service documentation; Level 3 from your test lab; Level 4 from the battery management system, over the battery's life.
  2. Decide who will issue and revoke access. Recyclers and workshops will ask for keys. Somebody has to answer them, and the decision has to be recorded.
  3. Plan the state-of-health updates. Level 4 is not filled once. Decide where the data comes from (BMS, telematics or service visits) and how it reaches the passport.

Our free 71-point checklist lists every data point with its access level and its label per battery category. If you would rather hand the sorting to someone else, this is what we do: you send the raw data, a specialist works through it with your team in 14-day sprints, and every value lands in the right level of a registry-ready passport.

Not legal advice. The regulation text is binding.

Sources

Battery passports, done for you
Send us your raw product data. We return a compliant battery passport within 30 days of receiving it, and keep it current.