The EU battery passport is an electronic record that every in-scope battery placed on the EU market must have from 18 February 2027. It is set by Article 77 and Annex XIII of the Battery Regulation, Regulation (EU) 2023/1542, and it is the first Digital Product Passport that is fixed in adopted law with a date. This guide covers what the law requires, what it does not require yet, and what the work looks like in practice.
Which batteries need a battery passport
Three categories need one from 18 February 2027:
| Category | Examples | Passport required |
|---|---|---|
| EV batteries | Traction batteries for electric cars, vans, trucks | Yes |
| LMT batteries (light means of transport) | E-bikes, e-scooters, e-mopeds | Yes |
| Industrial batteries above 2 kWh | Stationary energy storage, forklifts, industrial equipment | Yes |
| Industrial batteries up to 2 kWh | Small industrial packs | No |
| Portable batteries | Phones, laptops, power tools | No |
| SLI batteries | Starter batteries for vehicles | No |
Portable and SLI batteries are outside the passport obligation, but other Battery Regulation duties (labelling, collection, due diligence where it applies) still cover them.
The date applies to batteries placed on the market or put into service from 18 February 2027. A battery already on the EU market before that date does not need a passport retroactively; the next shipment does. Not sure where your batteries fall? The two-question battery check answers it.
Who is responsible
The obligation sits with the economic operator placing the battery on the EU market:
- an EU manufacturer, for batteries it makes and sells in the EU;
- the EU importer, for batteries made outside the EU;
- an authorised representative, when a non-EU manufacturer sells into the EU without an importer.
That operator answers for the passport even when most of the data comes from a manufacturer abroad. In practice the work is shared: the manufacturer supplies the data, the EU operator is accountable for what is published. Our article on battery passports for non-EU manufacturers and EU importers covers how that split usually works and what goes into supply contracts.
What goes into the passport
Annex XIII lists the content. The Commission's guidance "Digital Batteries Passport – data points by category" (v3.2, 19 October 2026) turns it into 71 data points, and labels each one, per battery category, as:
- mandatory,
- mandatory in certain cases (for example only for certain chemistries or uses),
- optional, or
- not to be filled for now.
So "71 data points" does not mean 71 mandatory fields for every battery. Which ones apply depends on whether the battery is an EV, LMT or industrial battery. Broadly, the data covers:
- Identification — manufacturer, model, unique battery identifier, place and date of manufacture, category, weight.
- Materials and composition — chemistry, critical raw materials, hazardous substances.
- Performance and durability — rated capacity, voltage, power, expected lifetime, temperature range.
- Circularity — dismantling information, spare parts, safety measures.
- Conformity — declaration of conformity and test reports.
- Dynamic data — battery status and state of health, updated over the battery's life.
The full list with the per-category labels is in our free 71-point checklist.
Not required for February 2027
Several parts of Annex XIII apply later, because the acts that define them are not adopted:
- Carbon footprint declaration and performance class: the calculation rules under Article 7 are not adopted, and the guidance marks carbon footprint as not to be filled. If you have a study, it can be stored, but it is not a February 2027 requirement.
- Recycled content shares for cobalt, lithium, nickel and lead.
- Supply-chain due diligence report: the obligation was moved to 2027 and has its own timeline.
Leaving these out on purpose is better than filling them with placeholder values that you later have to correct.
Who can see what: the access tiers
Article 77(2) splits the passport into tiers:
- Public — anyone scanning the QR code.
- Persons with a legitimate interest, plus the Commission and authorities — repairers, remanufacturers, second-life operators, recyclers.
- Notified bodies, market surveillance authorities and the Commission only.
Commercially sensitive data — detailed material composition, part numbers, dismantling instructions, test reports — sits in the restricted tiers. Battery status, state-of-health data and expected lifetime are restricted under Annex XIII point 4.
The implementing act that details access rights (Article 77(9)) is still a draft in consultation, so the exact access mechanics can still change. A passport built today should keep tier assignments configurable rather than hard-coded.
The QR code and the unique identifier
Each passport is reached through a QR code on the battery itself, printed or engraved visibly, legibly and indelibly (Article 13(6)); only if the battery is too small does it go on the packaging and accompanying documents. Each passport also needs a unique identifier. Many operators use a GS1 GTIN with a serial number, encoded as a GS1 Digital Link URL, so the same code works in logistics and for the passport.
The practical consequence: the identifier has to exist before the battery leaves the factory, because that is where the code is applied. Serial-level identifiers are therefore a production-line question, not just an IT question.
Separate battery labels under Article 13 and Annex VI apply 18 months after the Commission adopts the label-format act, which has not happened yet. Labels do not apply from August 2026.
The EU DPP Registry
The EU DPP Registry has been live since 20 July 2026 (Implementing Regulation (EU) 2026/1778). It stores each passport's unique identifier and commodity code, not the passport data itself. The data stays with the economic operator or its DPP service provider.
To register passports, the operator's organisation has to be verified in the Registry and needs a Service Account with the right to register DPPs. A service provider can register on the operator's behalf as an authorised third party (Article 19(4) of the implementing regulation). The Commission published the Registry's API guides and the battery data model on 30 October 2026. How we handle registration, and what the Registry launch means, are covered separately.
Standards: what is set and what is not
- DIN DKE SPEC 99100:2025-02 organises the passport into seven data clusters and is the working basis most implementations follow.
- EN 18216–18223 (CEN/CLC JTC 24), including EN 18222 for the interface layer, are cited in the Official Journal for ESPR products only. They do not give a presumption of conformity for battery passports. EN 18239 (access rights) and EN 18246 (data authentication) were ratified in August 2026 and are not cited.
- BatteryPass-Ready (Fraunhofer IPK) is a voluntary public test with 11 scenarios. It is a useful check, not a legal requirement.
The safe position is to design with reference to these standards, and to keep the passport versioned so it can be re-mapped when the delegated acts and the next guidance versions arrive. Battery Pass vs battery passport explains how these pieces relate.
What is still moving
- The access-rights implementing act (Art. 77(9)) — draft, expected around the end of 2026.
- The label-format act under Article 13(10) — not adopted.
- New versions of the data-point guidance — v3.2 renumbered the list; the next version may again.
- Omnibus amendments to the Battery Regulation (LMT battery removability, spare-part batteries, SVHC labelling) — in Parliament.
- A delegated act for DPP service providers, planned for 2027, which will set rules for providers like us.
None of these moves the 18 February 2027 date. They change the details of what a passport must contain and how it is accessed, which is why a passport is a record you maintain, not a document you produce once. The DPP timeline 2026–2030 tracks the dates.
How long it takes
The passport itself is the quick part. What takes time is the data behind it:
- Supplier data — composition, chemistry and performance data from cell and pack manufacturers, often in PDFs and spreadsheets in different formats.
- Test reports and declarations of conformity — they must match the battery models you actually place on the market.
- Serial-level identifiers — agreed with the factory and applied on the line before shipment.
Counting back from 18 February 2027, supplier data requests should already be out. Batteries shipped in January 2027 that arrive in the EU after the deadline need a passport.
How PassportLab helps
We are a done-for-you service: you send the product data you have, in whatever shape it is in, and we return a compliant, registry-ready battery passport within 30 days of receiving the data, then keep it current as the rules change. A named specialist maps your data against the 71 data points for your battery category, flags gaps before anything is published, issues one signed passport per battery with its QR code, and prepares the registration in the EU DPP Registry under your authorisation.
See how the service works, or book a 30-minute call to go through your batteries.
Sources
- Regulation (EU) 2023/1542 (Batteries Regulation), EUR-Lex
- Implementing Regulation (EU) 2026/1778 (EU DPP Registry), EUR-Lex
- Commission Implementing Decision (EU) 2026/1736 (EN 18216–18223 references), EUR-Lex
- Regulation (EU) 2024/1781 (ESPR), EUR-Lex
- Regulation (EU) 2019/1020 (market surveillance), EUR-Lex